Whole-Home Reverse Osmosis
360 Pro Flow RO System
Clean, high-purity water at every tap, delivered by a pre-assembled system that installs fast and runs quietly for years.
Configure your system below, then request a tailored quote from a 360 Water expert.
Match production to your home. Pro Flow 1000 suits 1 to 2 baths with low to moderate demand. Pro Flow 2000 suits 2 to 3 baths or higher daily use.
Your source sets the recovery rate and pre-treatment. City water and low-TDS wells under 1,000 ppm are both supported.
The Pro Flow pairs with atmospheric tanks from 80 to 250 gallons. Size your storage to daily demand.
Add pre-treatment or a UV stage to match your feed water. Carbon and sediment stages protect the membranes; the UV stage adds disinfection.
A delivery pump repressurizes water from an atmospheric tank to your home. Add one if you are not using a pressurized tank.
A professional install includes placement, connection, start-up, and a performance check by a 360 Water technician.
Configured for homes across nationwide
Built for serious performance
The power behind whole-home reverse osmosis
The Pro Flow arrives as one integrated package instead of a box of parts. Pump, membranes, controls, and pre-filtration are matched, mounted, and tested at our facility, so what you install is a system that already works together.
High-efficiency RO membranes
Three reverse osmosis membranes reduce dissolved solids by up to 98.5 percent, producing up to 2,000 gallons of clean water per day depending on configuration and feed water quality.
Flexible storage and delivery
Pair the Pro Flow with atmospheric tanks from 80 to 250 gallons. Add a high-pressure switch and delivery pump for automatic start, stop, and steady household pressure.
Integrated pre-treatment
A double O-ring housing with a 5-micron sediment filter shields the membranes and internal components. Add carbon, sediment, chemical injection, or ultraviolet stages to match your water.
Simple integrated controls
One control system manages tank level, automatic operation, membrane flushing, and quality indication, all from a front-access panel that keeps service quick.
System specifications
| Specification | Pro Flow 1000 (1,000 GPD) | Pro Flow 2000 (2,000 GPD) |
|---|---|---|
| Model | 224 PRO 1000 | 224 PRO 2000 |
| Configuration | Single Pass | Single Pass |
| Feed water | City or Well Water | City or Well Water |
| Standard recovery rate | 41 percent | 58 percent |
| Recovery with concentrate recycle | Up to 75 percent | Up to 75 percent |
| Salt rejection | 98.5 percent | 98.5 percent |
| Vessel array | 1 1 1 | 1 1 1 |
| Vessels | 2 | 2 |
| Permeate flow | 0.69 GPM | 1.39 GPM |
| Minimum feed flow | 1.69 GPM | 2.39 GPM |
| Maximum feed flow | 2.69 GPM | 3.39 GPM |
| Maximum concentrate flow | 1 GPM | 1 GPM |
| Membranes | 3 · 2.5 x 21 in | 3 · 2.5 x 40 in |
| Pump type | Rotary Vane | Rotary Vane |
| Motor | 3/4 HP | 3/4 HP |
| Voltage | 110V / 60Hz / single phase | 110V / 60Hz / single phase |
| Dimensions (W x D x H) | 24 x 31 x 52 in | 24 x 31 x 55 in |
| Weight | 120 lb | 160 lb |
| Temperature range | 40 to 105 F | 40 to 105 F |
| Feed pressure | 35 to 85 psi | 35 to 85 psi |
| Operating pressure | 150 psi | 150 psi |
| Maximum TDS | 1,000 ppm | 1,000 ppm |
| Maximum hardness | Less than 1 grain per gallon | Less than 1 grain per gallon |
| Maximum turbidity | 1 NTU | 1 NTU |
| Maximum SDI | Less than 3 | Less than 3 |
| Free chlorine | 0 ppm | 0 ppm |
| pH range | 3 to 11 | 3 to 11 |
Specifications reflect standard configurations. Actual performance varies with feed water quality, temperature, and pressure.
Why homeowners choose the 360 Pro Flow
Fully assembled and tested
Ships as a complete system, so installation is faster and there is no guesswork about matching parts.
Compact footprint
Fits mechanical rooms, garages, and utility spaces on a skid built for tight areas without giving up performance.
Simple maintenance
Front-access gauges, filters, and controls make routine service fast and intuitive.
Lower lifetime cost
Efficient recovery and durable, professional-grade components keep long-term operating costs down.
Water you can taste
Cleaner water in every room of the house
Whole-home reverse osmosis means the same high-purity water at the kitchen sink, the coffee maker, and every glass you pour. No under-sink unit for one faucet, no bottled water to haul home.
Cleaner, clearer water at every tap
Better-tasting drinking water
Better coffee, tea, and cooking
You may also need
Round out your Pro Flow system with the parts and add-ons that keep it running at its best.
Replacement RO Membranes
Genuine 2.5-inch membranes to keep rejection rates high and flow steady.
View
Sediment Pre-Filter Set
5-micron sediment cartridges for the double O-ring housing that protects your membranes.
View
Atmospheric Storage Tank
80 to 250 gallon tanks that hold treated water for on-demand household use.
ViewInstallation and maintenance, made simple
The Pro Flow arrives pre-assembled and pre-tested, so most of the work is done before it reaches your door. From there, service is designed to be quick and predictable.
Service Plans
Keep performance high with scheduled filter and membrane service handled by our team.
Experienced Water Team
Backed by a team that designs and supports water treatment systems for homes and light commercial sites.
Local Support
Real help from technicians who serve nationwide and know local water.
Flexible Install
Choose DIY with our guidance or a professional install by a 360 Water technician.
Bring commercial-level water quality home
Configure your 360 Pro Flow RO System today, or talk with a water expert who can size it to your home and your water.
Configure Your System